Setting up your TG589vacSetting up your main servicesProceed as follows:


1.    Take the DSL cable. This is the grey cable that is included in your package.

2.    Plug one end of the cable in the grey DSL port on the back of your TG589vac.

3.    If your delivery: Does not include a DSL splitter, plug the other end of the DSL cable into your telephone wall socket.

Includes a DSL splitter, plug the other end of the DSL cable into the DSL/Modemport of the DSL splitter. Plug the (LINE) cable of the DSL splitter into your telephone wall socket.Only use the DSL cable provided in your package. Other DSL cables may not work with the DSL subscription that you purchased.

A splitter/filter is a box that typically has the following connectors:

A Lineinput

A Phone/ PSTN output

A DSL/Mode output (optional)DSL




Setting up your TG589vac on your Local Network



1    Take an Ethernet cable. If your package contains an Ethernet cable with red connectors, you must use that cable.

2     Plug one end of the cable in the red WAN port on the back of your TG589vac.

3    Plug the other end of the cable into the Ethernet port of your Internet access device (for example, an optical network terminal for Fiber).    If you use another Ethernet cable than the one included in your package, make sure that the Ethernet cable is a fully wired CAT5E or CAT6 Ethernet cable.

The WAN port can only be used to connect your TG589vac to an Internet access device. You cannot use it to connect other devices (for example, a computer) to the TG589vac.WAN